Back To Experience

The Exum Files—Part 1: The Extended Column Test

Friday, November 17, 2017
Meet Bill Anderson—a Senior Exum Guide and Level 3 avalanche instructor for the American Avalanche Institute. It’s safe to say Bill knows a thing or two about the ins and outs of winter backcountry skiing. So when Bill sits down to discuss the finer details of the ECT—or Extended Column Test—as he does in this article, it’s time to listen.

Winter backcountry travelers, whether professional or otherwise, rely on a robust set of protocols, tools and observations if they want a long relationship with the snowy wilds. While continuously observing weather helps forecast how the snow is going to react to you traveling on it, digging into the snowpack has its own virtues that can help you make informed travel decisions. Snow pit evaluations including the Extended Column Test (ECT) and Propagation Saw Test (PST) provide vital stability information about specific elements of the snowpack. Today, we’re directing focus on the ECT, and how test results affect our in-the-field decisions. Please remember, these tests are only tools, which must be seen as a subset of a larger process which includes:

  • • Thoughtful route planning
  • • Terrain recognition combined with thorough observations
  • • Cooperative team interaction and group management

The caveat with snow pits is that, taken alone, pit tests offer little benefit to backcountry travelers due to overall snowpack variability. Nonetheless, there are still some good reasons to dig. In the first installment of the Exum Files, we talk to Senior Exum Guide Bill Anderson about the ECT and when the test is best used.

Extended Column Test: Is it worth the time?

It depends on what your experience is, what you’re dealing with, and how big of a decision you are attempting to make. If your avalanche problem is a fresh 20cm storm slab, you’re probably better off with less involved testing. The same would be true for small wind slabs in terrain with minimal secondary exposure.

If you are monitoring an eight-week-old persistent weak layer however, it's well worth the time. Especially, as your layer of concern gets deeper, the pit tests are going to give you the essential information on how things are progressing.

How do I make sense of my result?

The short answer is really simple. If you get an ECTP, (the “P” stands for propagation, meaning the weak layer fails across the entire column) then stay out of any avalanche terrain on that slope. That's correct, it's a NO GO situation. Pretend that you just observed a massive collapse underfoot.

Really, it's that cut and dry?

Yes, it is.

So, no propagation means we can ski the slope?

It's not quite that simple. You have to remember that this is just a piece of the overall observation process, and you still have to be diligent. Whether or not your test pit really represents the overall snowpack will always be a question, and a single data point is just one piece of the puzzle.

So what does tap count tell me?

It just tells you how may taps it took to get propagation and nothing more. Many people get caught up in over-analyzing their test, so keep in mind that you are working with a pile of snow, and that you are smacking it with a shovel. Propagation is the key element, and the nice thing is that you either see it or you don't.


Images: David Stubbs

We just experienced a big avalanche cycle and I'm still seeing ECT results: what’s up?

Well, if the layer you are looking at is as deep as the crown lines around your party, you’re seeing places where the structure is set for activity—but for whatever reason they haven't slid yet. It's a research topic as to what is really happening, but depending on the problem you may not be out of the woods. As with any backcountry tour, it’s good to have a backup plan or two, so you still enjoy a day’s tour safely connected to the trailhead.

Tips for how I perform an ECT quickly?

When you are trying to get your speed game going with pit tests, the first thing is to NOT hurry. Slow down. Humans tend to make very simple errors when they work in haste. Make your pit wall about 120-140cm across at the face and down 120cm or to your layer of concern. Dig smart: this means cutting blocks of snow with your shovel and rolling them out of the pit rather than sweeping loose snow around. Digging smart also means digging into the slope, as though you where doing a rescue—no straight down holes.

While you square the walls off, have your partner get their probe out. Come in about 15cm from either side, then measure for your ECT (30cm x 90cm) and place your probe on one of the upslope corners (vertically: have your partner eyeball it for you) and then place their probe on the other corner. Get your ECT cord out (or 3mm with knots) and wrap it around both of the probes and cut down leaving the ends flared to the full 120cm. Grab your snow saw, and using the probes as guides, square up the ends of your column. Assess if one side of the slab is thicker than the other, and then tap on that side. Now pull this test column out of the pit and repeat, so that you get two test results. By the time you’ve done a few dozen of these tests, you’re looking at a 15-minute time investment, so is that worth it?

A final word of advice?

I'm drawing a bit of a line in the sand with my interpretation with these results, and it's really cut and dry as to how I've presented it. There will come a day when this won’t be the case, but with our current understanding of avalanche mechanics this line stands. It's pretty common for me to see propagation in a pit test, walk away from the run, and then see 10-12 tracks on the thing an hour later. While you’d think that would be frustrating, it really isn't. You see, everyone makes their own call in this game, and it's a personal sort of mindset. My take is that there are times of the year or certain snow-packs where you simply cannot demonstrate any fracture potential, so why not just wait till that time? The mountains have always demanded a patient disposition in my experience, so it’s just part of the process to wait till the time is right.


—Interview by Jeff Burke

***

Bill Anderson is a senior guide for Exum Mountain Guides and Level 3 avalanche instructor for the American Avalanche Institute. He is also a fully accredited guide with the American Mountain Guides Association.

Exum Guides hosts the ultimate 3-day Ski Mountaineering clinic in the Tetons every winter. For more information visit: http://exumguides.com/ublminxportfolios/ski-mountaineering-clinic


Featured Gear

Comments